This projects started with a beautiful 33 Dodge that came to us with a late model 318. The first thing to do was to measure the engine compartment to see if the 5.7 would even fit into the '33. With the measurements telling us that the 5.7 would fit, Mark Kincaid removes the 318. Now that the 318 is out of the way, we can set the 5.7 HEMI in place to locate the engine mount stands. Mark cuts the old engine mount stands loose from the frame . Shown above are the engine motor mount plates that are now available from Street & Performance Stay Tuned for more photos as this project continues. See the whole story. Below is a note that Greg sent to S&P after he returned from the 2004 Power Tour.